How to Make It
Electric Motor Airplane
Materials for Electric Motor Airplane
Propeller 1
Wood stick 4
Woodblock 5
DC motor 1
AA battery 2
Battery holder
Wheel 4
Wheel pin 2
Double-sided foam tape
Step 1 Make the wing.
Cut 4 small square foam tape
Use 1 craft stick to mark 2 lines on the other craft stick
Put the foam tape on both ends of the blocks
Attach the blocks on the craft stick
Attach the other craft stick on the blocks
Step 2 Attach the tail.
Put foam tape on the block
Attach the block to the long stick
Attach the small stick onto the block
Step 3 Attach the wheels.
Put the stick through the hole
Attach 2 wheels to the stick
Push them together
Repeat for the other set of wheels
Step 4 Put together the parts.
Put foam tape on the wheel blocks
Attach it to the body
Put foam tape on the wings
Attach it to the body
Step 5 Attach the propeller.
Attach the cap to the propeller
Next, attach the propeller to the motor
Step 6 Connect the wires.
Remove the wire ends.
Twist the copper wires by holding the copper end and twisting the plastic part.
Repeat for the other wire.
Insert the red wire through the right side of the motor terminal.
Twist the wire onto itself.
Insert the black wire through the left side of the motor terminal.
Twist the wire onto itself.
Tape down the terminal with masking tape.
Step 7 Attach the motor and battery holder.
Put foam tape on the motor and battery holder
Pull the motor through the wings
Attach the motor and battery holder to the body
Step 8 Finish and add power.
Tape down the wires
Add the batteries
Turn it on.
